LiteLogic
E110S Series Architectural LED Trapezoid Wallpack is LiteLogic compatible.

More LiteLogic Products


E110S Series Architectural LED Trapezoid Wallpack

The E110S Series architectural trapezoid wallpack is designed for optimal light control and distribution. The die-cast aluminum construction provides ideal thermal management and durability. This series features field switchable power (3,800 to 14,500 lumens) and color temperature (3000K, 4000K and 5000K CCT). The E110S has a zero uplight design to eliminate light pollution and is offered with battery backup and photocontrol options. It is UL Listed for Wet Locations and is DesignLights Consortium® (DLC) PREMIUM Qualified for maximum energy savings and utility rebates. This series is ideal for new constructions or retrofit applications.

UL Certified DLC Premium cULus Listed for Wet Locations Litelogic bluetooth Warranty

Construction

  • Die-cast aluminum housing in a powder coated bronze finish with stainless steel hardware
  • UV Stabilized polycarbonate optical lens
  • Integral heat sink maximizes heat dissipation for longer LED life
  • Hinged back box isolates drivers from LEDs and offers easy access to drivers
  • Back box includes 3 conduit entry points (one on top and two on the sides, one side used for integral AUX sensor receptacle)
  • CCT and Wattage switches located inside housing

Optics/LEDs

  • Zero uplight design to minimize light pollution
  • Up to 176 LPW
  • CCT Switchable; 3000K, 4000K and 5000K CCT
  • CRI ≥80
  • L70 > 54,000 hours
  • L90 > 50,000 hours

Installation

  • Housing hinges to back box for easy installation
  • Back box accommodates conduit entry and integral AUX sensor receptacle
  • Mounts to a standard 3.5” or 4” electrical J-box
  • Three (3) ½” conduit holes on three sides allow for surface conduit wiring and integral AUX sensor receptacle
  • CCT and Wattage switches located inside housing
  • Same footprint as traditional trapezoid wallpack

Electrical

  • 120-277VAC, 50/60Hz
  • 0-10V Dimming driver
  • Power factor > 0.90
  • Total harmonic distortion <20%
  • All configurations are CCT (3000K/4000K/5000K) and power switchable (4 levels): 26W (1,882lm, 2,503lm, 3,374lm, 3,800lm); 65W (4,043lm, 5,783lm, 7,873lm, 9,400lm); 100W (6,667lm, 9,545lm, 12,725lm, 14,500lm)

Options

  • Integral battery backup option (BB) operates for 90 minutes, providing up to 900 lumens of emergency powered illumination for 90 minutes for path of egress. Rated for ambient temperatures of 10°C to 40°C (50°F to 104°F)
  • Field or factory installed 120/277VAC photocontrol button (PC)

Accessories

  • Receptacle built in on side of housing for plug and play occupancy sensors
  • LiteLogic Wireless Bluetooth PIR Sensor with daylight harvesting capabilities, Black Finish, 12V, (LE-E110S-BL-KIT)
  • Dimming occupancy sensor, PIR, with daylight harvesting capabilities, Black Finish, 12V, (SC-E110S-BL-KIT)
  • Remote for SC-E110S-BL-KIT occupancy sensor (TL-MSSW-REMOTE)
  • Button type universal photocontrol 120/277VAC (PCU)

Testing & Compliance

  • cULus Listed for Wet Locations
  • DesignLights Consortium® (DLC) PREMIUM Qualified
  • Operating temperatures: -40°C to 40°C (-40°F to 104°F)

Warranty

  • Five Year Warranty (Terms and Conditions Apply)

LiteLogic Accessories

LE-E110S-BL-KIT
Bluetooth Enabled Dimming Occupancy Sensor, PIR, Black
SC-E110S-BL-KIT
Dimming Occupancy Sensor, PIR, Black Finish
TL-MSSW-REMOTE
Remote Control for Motion Sensor (Non-Bluetooth Sensors Only)
PCU
120/277VAC Photocontrol

Contact us or your sales rep if you need a part number that isn't listed here.

E110S-26-CP-BR
E110S-26-CP-BR-BB
E110S-65-CP-BR
E110S-65-CP-BR-BB
E110S-65-CP-BR-BB-PC
E110S-65-CP-BR-PC
E110S-100-CP-BR

Energy Rebates

Qualified products may be eligible for utility rebates.


Enter your zip code to find a representative in your area.


exitronix trace lite specialty led growlite


Architectural LED Trapezoid Wallpack

The E110S Series architectural trapezoid wallpack is designed for optimal light control and distribution. The die-cast aluminum construction provides ideal thermal management and durability. This series features field switchable power (3,800 to 14,500 lumens) and color temperature (3000K, 4000K and 5000K CCT). The E110S has a zero uplight design to eliminate light pollution and is offered with battery backup and photocontrol options. It is UL Listed for Wet Locations and is DesignLights Consortium® (DLC) PREMIUM Qualified for maximum energy savings and utility rebates. This series is ideal for new constructions or retrofit applications.

UL Certified DLC Premium cULus Listed for Wet Locations Litelogic bluetooth Warranty

Need more information?

We are happy to answer any questions you have about the E110S Series Architectural LED Trapezoid Wallpack.

Spec Sheet Request More Info Rebate Finder

Configure your E110S Series Architectural LED Trapezoid Wallpack

Series
Wattage
CCT & Power Control
Finish
Options

Configure your E110S Series Architectural LED Trapezoid Wallpack

Series
Wattage
CCT & Power Control
Finish
Options

Construction

  • Die-cast aluminum housing in a powder coated bronze finish with stainless steel hardware
  • UV Stabilized polycarbonate optical lens
  • Integral heat sink maximizes heat dissipation for longer LED life
  • Hinged back box isolates drivers from LEDs and offers easy access to drivers
  • Back box includes 3 conduit entry points (one on top and two on the sides, one side used for integral AUX sensor receptacle)
  • CCT and Wattage switches located inside housing

Optics/LEDs

  • Zero uplight design to minimize light pollution
  • Up to 176 LPW
  • CCT Switchable; 3000K, 4000K and 5000K CCT
  • CRI ≥80
  • L70 > 54,000 hours
  • L90 > 50,000 hours

Installation

  • Housing hinges to back box for easy installation
  • Back box accommodates conduit entry and integral AUX sensor receptacle
  • Mounts to a standard 3.5” or 4” electrical J-box
  • Three (3) ½” conduit holes on three sides allow for surface conduit wiring and integral AUX sensor receptacle
  • CCT and Wattage switches located inside housing
  • Same footprint as traditional trapezoid wallpack

Electrical

  • 120-277VAC, 50/60Hz
  • 0-10V Dimming driver
  • Power factor > 0.90
  • Total harmonic distortion <20%
  • All configurations are CCT (3000K/4000K/5000K) and power switchable (4 levels): 26W (1,882lm, 2,503lm, 3,374lm, 3,800lm); 65W (4,043lm, 5,783lm, 7,873lm, 9,400lm); 100W (6,667lm, 9,545lm, 12,725lm, 14,500lm)

Options

  • Integral battery backup option (BB) operates for 90 minutes, providing up to 900 lumens of emergency powered illumination for 90 minutes for path of egress. Rated for ambient temperatures of 10°C to 40°C (50°F to 104°F)
  • Field or factory installed 120/277VAC photocontrol button (PC)

Accessories

  • Receptacle built in on side of housing for plug and play occupancy sensors
  • LiteLogic Wireless Bluetooth PIR Sensor with daylight harvesting capabilities, Black Finish, 12V, (LE-E110S-BL-KIT)
  • Dimming occupancy sensor, PIR, with daylight harvesting capabilities, Black Finish, 12V, (SC-E110S-BL-KIT)
  • Remote for SC-E110S-BL-KIT occupancy sensor (TL-MSSW-REMOTE)
  • Button type universal photocontrol 120/277VAC (PCU)

Testing & Compliance

  • cULus Listed for Wet Locations
  • DesignLights Consortium® (DLC) PREMIUM Qualified
  • Operating temperatures: -40°C to 40°C (-40°F to 104°F)

Warranty

  • Five Year Warranty (Terms and Conditions Apply)
E110S Series Architectural LED Trapezoid Wallpack
LE-E110S-BL-KIT
Bluetooth Enabled Dimming Occupancy Sensor, PIR, Black

SC-E110S-BL-KIT
Dimming Occupancy Sensor, PIR, Black Finish

TL-MSSW-REMOTE
Remote Control for Motion Sensor (Non-Bluetooth Sensors Only)

PCU
120/277VAC Photocontrol


Contact us or your sales rep if you need a part number that isn't listed here.

E110S-26-CP-BR
E110S-26-CP-BR-BB
E110S-65-CP-BR
E110S-65-CP-BR-BB
E110S-65-CP-BR-BB-PC
E110S-65-CP-BR-PC
E110S-100-CP-BR

Enter your zip code to find a representative in your area.


We Have More ItemsYou may also like